Kinetic Engineering Co.,Ltd
2, Soi Pracha-U-Thit 56, Pracha-U-Thit Rd., Tungkru, Tungkru, Bangkok 10140 Thailand
TEL:+662 873 5550 FAX:+662 873 5552 E-mail:info@kinetic.co.th, sales@kinetic.co.th

Gardner Denver

Gardner Denver catagories

Click for download catagories file

V-SERIES (ROTARY VANE TYPE)

Oil Lubricated & Dry Running Rotary Vane Pumps 

 

 

Elmo Rietschle offers dry running and oil lubricated rotary vane pumps which cover a wide performance range. The eco-friendly dry running rotary vane pumps are used for vacuum, pressure and combined pressure and vacuum applications. The time-tested oil lubricated rotary vane machines are typically used for generating vacuum.

 

 

Advantages at a glance:
  • Dry running and oil lubricated versions
  • Low noise level
  • Robust and economical
  • Long up times
  • Easy to operate

 

R-SERIES (ROOTS TYPE)

Rotary Lobe Blowers

These compact rotary lobe blowers belong to the group of dry running positive displacement pumps. This means that there is no need for oil or grease in the compression chamber. Only gear box and bearings, which are separated from the pumping chamber, are oil lubricated. Two non-contacting triple lobed rotary lobe rotors rotate against each other in the compression room. The triple lobed rotors avoid pulsation problems. The blowers are customized to cater for the varying demands of our customers‘ applications. 

Advantages at a glance:
* Robust and economical 
* Dry running 
* Modular design 
* Available as single aggregates 
* Available as individually engineered pump sets 
* Frequency control available 

C-SERIES (CLAW TYPE)

Innovative Claw Technology

The C-Series claw pumps and compressors of Elmo Rietschle generate contact-free vacuum or compressed air efficiently and economically. This is possible because of the principle of internal compression. The gas is pre-compressed within the compressing chamber and is then discharged. This leads to an evident energy saving compared to rotary lobe blower designs without internal compression.

Advantages at a glance:
•    Dry, contact-free operation
•    Process safe and reliable
•    No oil in the compression chamber
•    Frequency control available
•    Low sound level
•    No greasing of bearings

S-SERIES (SCREW TYPE)

The Screw: dry running and low maintenance vacuum pump

The S-VSI screw vacuum pump (sizes 100 and 300) represents modern, state-of-the-art dry running technology that excels when it comes to small carbon footprint and low life cycle costs. It is used in a variety of industrial applications such as drying and packaging. Click here to find out more.  
The S-VSA and S-VSB dry running, contact-free screw vacuum pumps are primarily used in the chemical and pharmaceutical industries for processing applications. A contamination with oil or other operating liquids is impossible. Several pump sizes are available with ATEX certification. 

Advantages at a glance 
•    Dry running
•    High vacuum in one stage
•    Application specific options
•    Short evacuation time due to high suction capacities
•    Insensitive against water shocks

G-SERIES (SIDE CHANNEL BLOWER TYPE))

Side Channel Blowers Leading in Excellence

Some technologies are so good that it is hard to improve them. Side channel blowers from Elmo Rietschle are such an example. They have proven their reliability in service for many decades, performing flawlessly day in and day out with virtually no down time. Noise levels have been lower than that of most other vacuum pumps and compressors.
Side channel blowers are used for conveying gases and gas-air mixtures.

Advantages at a glance
•    Reliable and built-to-last, virtually maintenance-free
•    Robust yet light-weight
•    For use worldwide (UL/CSA/IEC/EN approval)
•    50/60 Hz voltage range motors
•    ATEX 94/9 EG
•    Adjustable speed via external or integral converter

F SERIES (RADIAL TYPE)

Centrifugal blowers for industrial use

Elmo Rietschle offers a broad portfolio of single and multistage centrifugal blowers for vacuum and pressure operation.
The applications of Radial blowers are mainly used in the packaging and paper industries, with the smaller units are suitable for extracting dust with fine material such as paper powder and powdered solids.
Benefits at a glance 

•    Cast housing and impellers 
•    Robust and economical 
•    lubrication of bearings 
•    Quiet and vibration-free running 
•    Reliable and durable 
•    Speed control via frequency converter possible